• 10.6lbs
• Low vib
• 24" double side
• 22 cc

Comes supplied with fuel

A bike-handle trimmer equipped with a grass blade and trimmer head for heavy grass and dense weeds. Combi-guard can be used with either grass blade or trimmer head

• Self propelled
• Adjustable cutting depth
• 2 different cutting speeds

36" design aerates up to 3 acres/hr. TA10

Two independent tine rotors for easy maneuvering. Water containers optional.

• Self propelled H530
• 18" path
• 3.5 hp

Electric Wallcovering Steamer for easy removal of wall coverings

Pads 17x1

White - Polish

Tan- Buff

Green - Scrub

Black - Strip

Steel Wool Pad

10'6" aluminum siding brake

• Electric
• 63 gallons per minute pumping ability
• Comes with 50 ft discharge hose

• Tills 6" deep 40" wide
• Steel 3/8" tines
• Fits most mini skid steers

• Hydraulic driven
• Great for seed or sod bed preparation
• Can be used for grading or rock rowing lawns
• Attaches to most mini skid steers
• Overall width: 67"
• Working width: 48"

*Cannot be used to grade gravel driveways/roads*

• Auger holes up to 42" deep
• 9", 12", 16", 18", 20", or 24" wide augers available
• Fits most mini skid steers
• Provides 1060 ft/lbs of torque at 3000psi

3/8" x 50' Hose

Threader with dies 3/8"-1" and vice

• 13" orbital floor polisher
• Strip, scrub, buff and polish

*pads sold seperately*

• 17" orbital floor polisher
• Strip, scrub, buff or plolish
• 1.5HP
• 175RPM

*Pads sold seperately*

The easy to use 461A Flooring Stapler is the fast and cost effective way to secure 1/ 4 In. to 5/8 In Engineered and Bamboo Wood Flooring, Today’s floors can present installation challenges due to the various dimensional profiles of the flooring. PNI’s commitment to provide solutions for the hardwood flooring installer is once again displayed with this easy to use Stapler that will adjust for various thicknesses and will accommodate three different lengths of fasteners. Bamboo and Engineered floors are easy to install and stay in place when stapled into proper sub floor systems. The 461A uses 1 In. to 1-9/16 In. 18 ga 1/4 In. crown staples. The 18 gauge staple provides superior holding power and its thin profile can help to prevent de-lamination of engineered flooring. The 461A’s adjustable shoe bases along with the adjustable Elevator Platform, for fine tuning the position of the staple, give you the versatility to obtain professional installation results with

PNI’s 418A Portamatic Evolution is designed to give you tight floors and exact nail placement for 3/8" to 5/8" Engineered and Horizontal or Vertical Grain Bamboo flooring requiring the use of an 18 ga nail to reduce the risk of splitting the tongue of the wood or dimpling the top prefinished surface. (Nails are available in lengths of 1-1/4 In. # 41801 and 1-1/2 In. # 41802) Today’s imported and prefinished floors need special attention for the nail placement and protecting the top edge of the factory finish. The 418A delivers with an 18 ga nail and adjustable base plate second to none. First, it sets against the front of the tongue, reducing the risk of damaging the top edge of the flooring. Second, it features a shim-less height adjustment through the action of an easy to adjust cam mechanism.

• Towable with a 2" ball
• 6 cubic foot, gas powered
• Mixes three 80lb bags at a time
• Weighs 700lbs

• Cuts brick or blocks
• 14" diamond blade
• Wet/Dry

• 10" Diamond Blade
• Built in water distribution
• Cutting tile up to 24" in length and 14" on the diagonal

• Diesel Burner
• 150° Temp Rise
• 50' 3/8" Hose

• 3500PSI
•  0, 15,  25 & 40 degree high pressure spray nozzles
• 50' hose