13 Amp, 120V Rotary Hammer

Dri-Eaz Sahara E Turbo Dryer is a great general purpose air mover

• Removes 64 pints of water daily
• Easy to transport, commercial quality
• 50' discharge hose, no bin to empty

Electric Pavement Breaker with Cart and Chisels. Designed for heavy duty concrete demolition

• 110V
• Breaks up to 8" of concrete

This bull float is made from lightweight magnesium, and is used to level and smooth the surface prior to finishing. Magnesium floats provide a smoother finish than wood floats

• 7 orifice sizes
• Tight sealing flow shutoff prevents leakage
• Adjustable trigger stop for consistency of pattern
• Hopper capacity is approximately 2 gallons

The Kushlan Products Concrete Vibrator helps deliver vibrations to eliminate bubbles in your concrete ensuring a quality job.

• Wheelbarrow Style
• 2 Cubic Foot
• Can mix one 80lb bag at a time

• Wheelbarrow style
• 2 Cubic feet
• Can mix one 80lb bag at a time
• Electric

High volume blower quickly dries carpet, floors, fresh paint, concrete sealer and more

36" or 42" design aerates up to 3 acres/hr. TA10

Two independent tine rotors for easy maneuvering. Water containers optional.

Electric Wallcovering Steamer for easy removal of wall coverings

Pads 17x1

White - Polish

Tan- Buff

Green - Scrub

Black - Strip

Steel Wool Pad

10'6" aluminum siding brake

• Electric
• 63 gallons per minute pumping ability
• Comes with 50 ft discharge hose

• Tills 6" deep 40" wide
• Steel 3/8" tines
• Fits most mini skid steers

• Hydraulic driven
• Great for seed or sod bed preparation
• Can be used for grading or rock rowing lawns
• Attaches to most mini skid steers
• Overall width: 67"
• Working width: 48"

*Cannot be used to grade gravel driveways/roads*

• Auger holes up to 42" deep
• 9", 12", 16", 18", 20", or 24" wide augers available
• Fits most mini skid steers
• Provides 1060 ft/lbs of torque at 3000psi

3/8" x 50' Hose

Threader with dies 3/8"-1" and vice

• 13" orbital floor polisher
• Strip, scrub, buff and polish

*pads sold seperately*

• 17" orbital floor polisher
• Strip, scrub, buff or plolish
• 1.5HP
• 175RPM

*Pads sold seperately*

The easy to use 461A Flooring Stapler is the fast and cost effective way to secure 1/ 4 In. to 5/8 In Engineered and Bamboo Wood Flooring, Today’s floors can present installation challenges due to the various dimensional profiles of the flooring. PNI’s commitment to provide solutions for the hardwood flooring installer is once again displayed with this easy to use Stapler that will adjust for various thicknesses and will accommodate three different lengths of fasteners. Bamboo and Engineered floors are easy to install and stay in place when stapled into proper sub floor systems. The 461A uses 1 In. to 1-9/16 In. 18 ga 1/4 In. crown staples. The 18 gauge staple provides superior holding power and its thin profile can help to prevent de-lamination of engineered flooring. The 461A’s adjustable shoe bases along with the adjustable Elevator Platform, for fine tuning the position of the staple, give you the versatility to obtain professional installation results with