For use in workshops, construction sites, farms and loading docks with proper ventilation.

Straight End

• Forks open 30" (76.2 cm) wide
• Made for Mini Skid Steers
  

• Deckover
• Beaver tail
• Removable ramps
• 2 & 5/16 ball
• 16,000 GVW

Powerful Honda GX160 Engine is easy to start and able to drive high pump performance

• Thermally stable cast iron cylinder body and valve plate.
• Fully enclosed belt guard covers and protects moving parts
• 10" flat free tire is center mounted for easy maneuverability over rough terrain and job sites
• Four vibration isolators control vibration and helps to prevent crawling
• Ball drain valve allows for quick and thorough tank draining

• Ergonomic design for better handling
• Easy to read and use front operation panel
• Two quick disconnect couplers to run two tools simultaneously
• Protective back shroud and enclosed frame for rugged applications
• Oil-lubricated pump for long life

• Payload Capacity: 2,750
• GVW: 3,000
• Electric Brakes
• 2" Ball

• Tilt bed
• 14,000lb GVW
• 6.5' wide between wheel wells 
• 2 5/16" hitch

32" Commerical Pedestal Floor Fan

• 18" Maximum Trenching Depth
• Trench Width 3"
• Weighs 230 lbs
• 60 Inches Long
• 24 Inches Wide
• 41 Inches Tall

• 70 HP
• 8'  Dozer Blade
• 6 Way Tilt
• Weighs 18,000lbs
• D3G XL

DELIVERY AN ADDITIONAL FEE DEPENDING ON LOCATION

***DAY PRICE = 8 METER HOURS ON MACHINE***

• 130 cfm
• working pressure: 100 psi
• air reciever tank: 7.92 gal

• Separate rocks and debris
• Grade, level, fill, pulverize clumps of dirt
• Hydraulic driven
• 6' OR 7' options available

Separate unwanted objects, rocks, and debris while leaving finer material behind with the rock bucket attachment.

Tines scoop and retain debris while the soil sifts through, helping to easily separate materials on the jobsite. Designed to last in tough working conditions, tines are interconnected to provide strength and durability.

The rock bucket is the ideal attachment for contractors, landscapers, and homeowners with acreage.

• 48.0-hp John Deere PowerTech engine
• 12 Forward/12 Reverse PowrReverser™ transmission
• Standard folding ROPS, 4-wheel drive & load match
• 1/2 Yard Bucket

***DAY PRICE = 8 METER HOURS ON MACHINE***

• Tows vehicles with a width of 74" or smaller
• Towing vehicle must be lager than towed vehicle
• Front wheel drive vehicles only
• 2" reese hitch to haul

40', Aluminum, Type IA, Extension Ladder, 300 LB Duty Rating, Quick Latch, Safety Rung Lock, Mar-Resistant End Caps, Swivel Safety Shoes, D-Shaped Rungs, Meets OSHA, CSA, & ANSI Standards, Rope & Pulley, Modified I-Beam Construction.

Pneumatic, Hardwood Flooring Stapler. Use to install 3/4" solid hardwood flooring

13 Amp, 120V Rotary Hammer

• High torque, low RPMS
• 9", 12", 16", 18" 20", 24" or 30" wide auger bits available
• Bits go 42" deep (2' extension available for deeper jobs)
• Hydraulic driven

Bobcat Fork Attachment

Floor Scrapers provide an easy method to clean up construction materials on concrete surfaces or wood sub floors.

The Bostitch SX1838K 18GA Narrow Crown Finish Stapler is designed for the professional driving 7/32 In. narrow crown staples from 1/2 In. to 1-1/2 In. in length. Along with our other small-body finish tools, this tool is made with lightweight magnesium and has a tough new industrial design. The oil-free engine requires no maintenance and prevents stains on work surfaces, while the swivel air fitting with filtered air inlet increases maneuverability and improves engine durability.

Wire Weld Framing Nailer